Kasmac Industries Co., Ltd.
Kasmac Industries Co., Ltd.
Add to Cart
Descriptions :
Working principle of the batch type, to expand a fixed mass of raw material in a fixed volume which enables to reach easily desired density. Dosing unit to weight the right amount of EPS for the adjusted density. Filling to the vessel is done by gravity.
After the pre-expansion, you can select the silo from the display, where you want to send the expanded material. The operator can select several silos at the same time with a priority.
This model including expansion body, dryer bed, automatic feeding system, sieving devices, weighting system, blower etc.
| Main Technical Parameters | ||||
| Name | Batch pre-expander machine | Batch pre-expander machine with second expansion | ||
| Model | FW-YF1100-1 | FW-YF1500-1 | FW-YF1500-2 | |
| Chamber size | Diameter | Φ1100 mm | Φ1500 mm | Φ1500 mm |
| Height | 1500 mm | 2200 mm | 2200 mm | |
| Volume | 0.95 m3 | 3 m3 | 3 m3 | |
| Expansion rate | Second time expansion | -- | -- | 4-6 kg/m3 |
| First back | -- | -- | 8-12 kg/m3 | |
| First time expansion | 12-30 kg/m3 | 12-20 kg/m3 | 12-20 kg/m3 | |
| Density tolerance | ≦± 3% | ≦± 3% | ≦± 3% | |
| Cycle time | ≦120 s/cycle | ≦120 s/cycle | ≦120 s/cycle | |
| Steam | Entry | DN40 | DN50 | DN50 |
| Pressure | 0.4-0.6 Mpa | 0.4-0.6 Mpa | 0.4-0.6 Mpa | |
| Consumption | 3.5-7 kg/cycle | 6-9 kg/cycle | 6-9 kg/cycle | |
| Compressed Air | Entry | DN40 | DN50 | DN50 |
| Pressure | 0.4-0.6 Mpa | 0.4-0.6 Mpa | 0.4-0.6 Mpa | |
| Consumption | 0.5-0.6 m3/cycle | 0.6-0.7 m3/cycle | 0.6-0.7 m3/cycle | |
| Exhaust | Upper | DN100 | DN150 | DN150 |
| Lower | DN80 | DN100 | DN100 | |
| Fan Outlet | -- | -- | DN100 | |
| Throughput | 4g/L (Kg/h) | -- | -- | ≧ 280 |
| 6g/L (Kg/h) | -- | -- | ≧ 420 | |
| 8g/L (Kg/h) | -- | -- | ≧ 560 | |
| 12g/L (Kg/h) | ≧ 340 | ≧ 633 | ≧ 633 | |
| 15g/L (Kg/h) | ≧ 420 | ≧ 790 | ≧ 790 | |
| 20g/L (Kg/h) | ≧ 570 | ≧ 1200 | ≧ 1200 | |
| 25g/L (Kg/h) | ≧ 710 | -- | -- | |
| 30g/L (Kg/h) | ≧ 710 | -- | -- | |
| Material conveying port | 200 mm | 200 mm | 200 mm | |
| Installed power | Spindle motor | 4 kw | 7.5 kw | 7.5 kw |
| Discharge fan | 1.5 kw | 2.2 kw | 2.2 kw | |
| Exhaust fan | 1.5 kw | 2.2 kw | 2.2 kw | |
| Vacuum pump | 5.5 kw | 5.5 kw | 5.5 kw | |
| Drying fan | 3 kw | 4 kw | 4 kw | |
| Material conveying fan | 4 kw | 7.5 kw | 7.5 kw | |
|
Feeding and mixing motor |
0.75 kw | 0.75 kw | 0.75 kw | |
| Crushing motor | 0.55 kw | 0.55 kw | 0.55 kw | |
|
Second sucking material fan |
– | – | 3 kw | |
| Total installed power | 20.8 | 30.2 | 33.2 | |
| Overall dimension | L | 5600 mm | 6000 mm | 6000 mm |
| W | 3100 mm | 3700 mm | 3700 mm | |
| H | 4950 mm | 5600 mm | 5600 mm | |
| Machine weight | 3000 kg | 4000 kg | 4000 kg | |