Kasmac Industries Co., Ltd.
Kasmac Industries Co., Ltd.
Add to Cart
Descriptions :
This model combine dehumidifying and drying into one unit.
EMDE-HD adopt microcomputer controller and P.I.D temperature control technology can accurately control temperature. Heatless regenerator of dehumidifying and drying offer lower dew point wind. Directly installed on material inlet of IMM can avoid dried material wetting back because of external contacting.
| Main Technical Parameters | |||||
| Model EMDE | 5-HD | 10-HD | 15-HD | 20-HD | 25-HD |
| Nominal Capacity Flow | 0.1 Nm³ /min | 0.15 Nm³/min | 0.2 Nm³ /min | 0.3 Nm³ /min | 0.3 Nm³ /min |
| Nominal Pressure Dew Point | -40°C | -40°C | -40°C | -40°C | -40°C |
| Specified Work Pressure | 0.7Mpa | 0.7Mpa | 0.7Mpa | 0.7Mpa | 0.7Mpa |
| Max. Work Pressure | 1.0Mpa | 1.0Mpa | 1.0Mpa | 1.0Mpa | 1.0Mpa |
| Min. Work Pressure | 0.4Mpa | 0.4Mpa | 0.4Mpa | 0.4Mpa | 0.4Mpa |
| Specified Air Inlet Temperature | 35°C | 35°C | 35°C | 35°C | 35°C |
| Max. Air Inlet Temperature | 50°C | 50°C | 50°C | 50°C | 50°C |
| Work Environment Temperature | 0-40°C | 0-40°C | 0-40°C | 0-40°C | 0-40°C |
| Regen Air Consumption Rate | ≤15% | ≤15% | ≤15% | ≤15% | ≤15% |
| Different Pressure | ≤0.02Mpa | ≤0.02Mpa | ≤0.02Mpa | ≤0.02Mpa | ≤0.02Mpa |
| Work Power | 220V/50HZ | 220V/50HZ | 220V/50HZ | 220V/50HZ | 220V/50HZ |
| Protection Level | IP65 | IP65 | IP65 | IP65 | IP65 |
| Noise | ≤75dB(A) | ≤75dB(A) | ≤75dB(A) | ≤75dB(A) | ≤75dB(A) |
| Material Barrel Capacity (L) | 8 | 15 | 25 | 30 | 40 |
| Heater Power (kw) | 200 | 800 | 1500 | 1500 | 2000 |
| Dimensions | |||||
| W (mm) | 480 | 520 | 570 | 580 | 620 |
| D (mm) | 400 | 400 | 400 | 445 | 445 |
| H (mm) | 825 | 825 | 840 | 880 | 880 |
